资源介绍:  

This British Standard was published by BSI. It is the UK implementation of EN 1993-1-3:2006. It supersedes DD ENV 1993-1-3:2001 which is withdrawn.

 

It partially supersedes BS 5950-5:1998, BS 5950-6:1995 and BS 5950-9:1994.

 

These standards will be withdrawn by March 2010 at the latest.

 

(1) EN 1993-1-3 gives design requirements for cold-formed thin gauge members and sheeting. It applies to cold-formed steel products made from coated or uncoated thin gauge hot or cold rolled sheet or strip, that have been cold-formed by such processes as cold-rolled forming or press-braking. It may also be used for the design of profiled steel sheeting for composite steel and concrete slabs at the construction stage, see EN 1994. The execution of steel structures made of cold-formed thin gauge members and sheeting is covered in EN 1090.

(2) Methods are also given for stressed-skin design using steel sheeting as a structural diaphragm.

(3) This part does not apply to cold-formed circular and rectangular structural hollow sections supplied to EN 10219, for which reference should be made to EN 1993-1-1 and EN 1993-1-8.

(4) EN 1993-1-3 gives methods for design by calculation and for design assisted by testing. The methods for design by calculation apply only within stated ranges of material properties and geometrical proportions for which sufficient experience and test evidence is available. These limitations do not apply to design assisted by testing.

(5) EN 1993-1-3 does not cover load arrangement for testing for loads during execution and maintenance.

(6) The calculation rules given in this standard are only valid if the tolerances of the cold formed members comply with EN 1090-2

1. 本网支持版权保护。资源频道仅提供资源的介绍，以及部分不侵犯版权、内容合符本网协议要求的资源下载和预订；
2. 若本网页未显示资源下载或预订链接，表示本网不提供该资源的下载或预订；
3. 关于该资源的销售、技术、支持等详细情况，请进入作者/开发商的官方网站了解；
4. 资源频道的资源均由本网会员提供，如有问题请致Email给abuse@engrwebh.com投诉；