Combinations of surface preparation, primers, intermediates, and topcoats may be selected for special situations for alkyd painting systems using the following Guide. To do so, select the desired surface preparation, primer, intermediate(s), and topcoat from those listed herein and insert them into the standard SSPC Painting System format. In order to aid in the selection, short comments are given. For additional information consult the “Commentary on Painting Systems” and the referenced standards.
1. Scope
1.1 These specifications cover alkyd painting systems for commercial blast cleaned or pickled steel.
1.2 These systems are suitable for use on parts or structures exposed in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry).
1.3 The color of the finish paint must be specified.
2. Description
2.1 This guide outlines the components of a complete alkyd painting system. A painting system shall consist of surface preparation by commercial blast cleaning or pickling, one coat of alkyd primer, one or two intermediate coat(s), and one finish coat.