繁体】【设为首页】【收藏
当前位置:频道首页 >>工程规范 >> 欧标 >>

  BSEN1993-4-3-2007 Design of steel structures - Pipelines

EN 1993-4-3 gives design rules for the structural design of buried pipelines, in particular for the evaluation of the strength, stiffness and deformation capacity. The rules for local buckling in this part EN 1993-4-3 are in line with those in other pipeline standards. The design critical curvatures according to EN 1993-4-3 are larger than those that could be deduced from EN 19...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/07/31

  BSEN1993-5-2007 Design of steel structures - Piling

This British Standard was published by BSI. It is the UK implementation of EN 1993-5:2007. BS EN 1993-5 will partially supersede BS 449-2:1969 and BS 5950-1:2000, which will be withdrawn by March 2010. EN 1993-5 gives design rules for steel sheet piling and bearing piles to supplement the generic rules in EN 1993-1. EN 1993-5 is intended to be used with Eurocodes EN 1990 - Basi...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/07/31

  BSEN1993-6-2007 Design of steel structures - Crane supportin...

EN 1993-6 is one of the six parts of EN 1993 ”Design of Steel Structures” and gives principles and application rules for the safety, serviceability and durability of crane supporting structures. EN 1993-6 gives design rules that supplement the generic rules in EN 1993-1. EN 1993-6 is intended for clients, designers, contractors and public authorities. EN 1993-6 is intended to...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/07/31

  BSEN1997-1-2004 Geotechnical design - General rules

This British Standard is the official English language version of EN 1997-1:2004. It supersedes DD ENV 1997-1:1995 which is withdrawn. Scope of EN 1997:(1) EN 1997 is intended to be used in conjunction with EN 1990:2002, which establishes the principles and requirements for safety and serviceability, describes the basis of design and verification and gives guidelines for relate...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1997-2-2007 Geotechnical design - Ground investigation a...

This British Standard was published by BSI. It is the UK implementation of EN 1997-2:2007. It supersedes DD ENV 1997-2:2000 and DD ENV 1997-3:2000 which are withdrawn. It partially supersedes BS 5930:1999 and BS 1377-9:1990. Scope of Eurocode 7:(1) EN 1997 is intended to be used in conjunction with EN 1990:2002, which establishes the principles and requirements for safety and s...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1998-1-2004 Design of structures for earthquake resistan...

This British Standard is the official English language version of EN 1998-1:2004. It supersedes DD ENV 1998-1-1:1996, DD ENV 1998-1-2:1996 and DD ENV 1998-1-3:1996 which are withdrawn. Scope of EN 1998:(1)P EN 1998 applies to the design and construction of buildings and civil engineering works in seismic regions. Its purpose is to ensure that in the event of earthquakes:- human...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1998-2-2005 Design of structures for earthquake resistan...

This British Standard is the official English language version of EN 1998-2:2005. It supersedes DD ENV 1998-2:1996 which is withdrawn. (1) The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.(2) Within the framework of the scope set forth in EN 1998-...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1998-3-2005 Design of structures for earthquake resistan...

This British Standard is the official English language version of EN 1998-3:2005. It supersedes DD ENV 1998-1-4:1996 which is withdrawn. (1) The scope of Eurocode 8 is defined in EN 1998-1: 2004, 1.1.1 and the scope of this Standard is defined in (2), (4) and (5). Additional parts of Eurocode 8 are indicated in EN 1998-1: 2004, 1.1.3.(2) The scope of EN 1998-3 is as follows:- T...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1998-4-2006 Design of structures for earthquake resistan...

This British Standard was published by BSI. It is the UK implementation of EN 1998-4:2006. It supersedes DD ENV 1998-4:1999 which is withdrawn. (1) The scope of Eurocode 8 is defined in EN 1998-1: 2004, 1.1.1 and the scope of this Standard is defined in this clause. Additional parts of Eurocode 8 are indicated in EN 1998-1: 2004, 1.1.3.(2) This standard specifies principles and...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1998-5-2004 Design of structures for earthquake resistan...

This British Standard is the official English language version of EN 1998-5:2004. It supersedes DD ENV 1998-5:1996 which is withdrawn. (1)P This Part of Eurocode 8 establishes the requirements, criteria, and rules for the siting and foundation soil of structures for earthquake resistance. It covers the design of different foundation systems, the design of earth retaining struct...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1998-6-2005 Design of structures for earthquake resistan...

This British Standard is the official English language version of EN 1998-6:2005. It supersedes DD ENV 1998-3:1997 which is withdrawn. For the design of structures in seismic regions the provisions of this standard are to be applied in addition to the provisions of the other relevant Eurocodes. In particular, the provisions of the present standard complement those of Eurocode 3...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1999-1-1-2007 Design of aluminium structures - General s...

This British Standard is the UK implementation of EN 1999-1-1:2007. It supersedes DD ENV 1999-1-1:2000 which is withdrawn. Details of superseded British Standards are given in the table below. EN 1999 is intended to be used with Eurocodes EN 1990 – Basis of Structural Design, EN 1991 – Actions on structures and EN 1992 to EN 1999, where aluminium structures or aluminium compo...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1999-1-2-2007 Design of aluminium structures - Structura...

This British Standard was published by BSI. It is the UK implementation of EN 1999-1-2:2007. It supersedes DD ENV 1999-1-2:2000, which will be withdrawn on 31 March 2010. Scope of EN 1999:(1)P EN 1999 applies to the design of buildings and civil engineering works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the ...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1999-1-3-2007 Design of aluminium structures - Structure...

This British Standard is the UK implementation of EN 1999-1-3:2007. It supersedes DD ENV 1999-2:2000 which is withdrawn. Details of superseded British Standards are given in the table below. EN 1999 is intended to be used with Eurocodes EN 1990 – Basis of Structural Design, EN 1991 – Actions on structures and EN 1992 to EN 1999, where aluminium structures or aluminium compone...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1999-1-4-2007 Design of aluminium structures - Cold-form...

Scope of EN 1999:(1)P EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 – Basis of structural design.(2) EN 1999 is only concerned with requirements for resistanc...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN1999-1-5-2007 Design of aluminium structures - Shell str...

This British Standard was published by BSI. It is the UK implementation of EN 1999-1-5:2007. Scope of EN 1999:(1)P EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 199...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06

  BSEN2-1992 Classification of fires

This standard defines classes of fires according to the material undergoing combustion. In consequence it does not define a particular class of fire involving an electrical risk. The present document classifies in four categories the different kinds of fires which can be defined in terms of the nature of the fuel. Such a classification is particularly useful in the context of f...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/04/20

  BSEN485-1-2008 Aluminium and aluminium alloys - Sheet, strip...

This British Standard is the UK implementation of EN 485-1:2008. It supersedes BS EN 485-1:1994 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys. This document (EN 485-1:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is he...
 下载次数:0次  软件大小:337.35 KB  关注度:★★★★★  更新时间:2008/09/07

  BSEN62061-2005 Safety of machinery - Functional safety of sa...

This British Standard is the official English language version of EN 62061:2005. It is identical with IEC 62061:2005, incorporating Corrigendum July 2005. The UK participation in its preparation was entrusted to Technical Committee GEL/44, Safety of machinery —Electrotechnical aspects, which has the responsibility to:— aid enquirers to understand the text;— present to the re...
 下载次数:0次  软件大小:850.18 KB  关注度:★★★★★  更新时间:2008/09/07

  DDENV1994-1-1-1994 Design of composite steel and concrete st...

This publication comprises the English language version of ENV 1994-1-1:1992 Eurocode 4: Design of composite steel and concrete structures — Part 1.1: General rules and rules for buildings, as published by the European Committee for Standardization (CEN), plus the National Application Document to be used with the ENV in the design of buildings to be constructed in the United K...
 下载次数:0次  软件大小:未知  关注度:★★★☆☆  更新时间:2008/08/06
总数:94    首页 上一页 下一页 尾页 页: 3/5  
关于我们 | 联系我们 | 版权声明 | 注册协议 | e商频道协议 | 广告服务 | 投诉

  • ENGR网

    版权所有(c)2008-2010

  •