BS 5400 is a document combining codes of practice to cover the design and construction of steel, concrete and composite bridges and specifications and recommendations for the loads, materials and workmanship. It comprises the following Parts:— Part 1: General statement;— Part 2: Specification for loads;— Part 31): Code of practice for design of steel bridges;— Part 4: Code ...

BS 5400 is a document combining codes of practice to cover the design and construction of steel, concrete and composite bridges and specifications for loads, materials, and workmanship. It comprises the following Parts and Sections:— Part 1: General statement;— Part 2: Specification for loads;— Part 3: Code of practice for design of steel bridges;— Part 4: Code of practice ...

BS 5400 is a document combining codes of practice to cover the design and construction of steel, concrete and composite bridges and specifications for loads,materials, and workmanship. It comprises the following Parts and Sections:— Part 1: General statement;— Part 2: Specification for loads;— Part 3: Code of practice for design of steel bridges;— Part 4: Code of practice f...

This part of BS 5950 gives recommendations for the design of structural steelwork using hot rolled steel sections, flats, plates, hot finished structural hollow sections and cold formed structural hollow sections, in buildings and allied structures not specifically covered by other standards. Detailed recommendations for practical direct application of “second order” methods ...

This Part of BS 5950 has been prepared under the direction of the Civil Engineering and Building Structures Standards Policy Committee. This Part of BS 5950 replaces BS 5950 : Part 2 : 1985 which is withdrawn. BS 5950 is a document combining codes of practice to cover the design, construction and fire protection of steel structures and specifications for materials, workmanship ...

This Part of BS 5950 and Amendment No. 1 have been prepared under the direction of Technical Committee B/525, Building and Civil Engineering and Structures. BS 5950 comprises codes of practice which cover the design, construction and fire resistance of steel structures and specifications for materials, workmanship and erection. It comprises the following Parts and Sections:Part...

This Part of BS 5950 has been prepared under the direction of the Civil Engineering and Building Structures Standards Policy Committee. BS 5950 15 a document combining codes of practice to cover the design, construction and fire resistance of steel structures and specifications for materials, workmanship and erection. It comprises the following Parts:Part 1. Code of practice fo...

This part of BS 5950 has been prepared by Subcommittee B/525/31, Structural use of steel. It supersedes BS 5950-8:1990, which is withdrawn. This new edition has been prepared following the developments in fire engineering and the issue of a number of new and related standards adopting European and international standards for materials. The principal change in this edition is th...

This Part of BS 6399 has been prepared by Subcommittee B/525/1, Actions (loadings) and basis of design. It supersedes BS 6399-1:1984, which is withdrawn. This edition of BS 6399-1, introduces technical changes, but it does not reflect a full revision of the standard which will be undertaken in due course. The start and finish of text introduced or altered by Amendment No. 1 is ...

This Part of this British Standard has been prepared by Subcommittee B/525/1, Actions (loadings) and basis of design, and supersedes CP3 : Chapter V : Part 2 : 1972. This Part of BS 6399 is a technical revision of CP3 : Chapter V : Part 2 and incorporates the considerable advances made and experience gained in wind engineering since that time. CP3 : Chapter V : Part 2 will not ...

This Part of this British Standard has been prepared by Subcommittee B/525/1, Actions (loadings) and basis of design, and supersedes BS 6399-2:1995. This Part of BS 6399 is only applicable to sites in the UK. The climate dependent factors (for altitude, direction, season and probability) have been calibrated specifically for the UK. While the general methodology and pressure co...

This Part of this British Standard Code of practice has been prepared under the direction of the Civil Engineering and Building Structures Standards Committee as a new Part to BS 6399 (formerly CP 3: Chapter V). Imposed roof loads were previously included in BS 6399-1. This new Part of BS 6399 now gives more information on imposed roof loads and in particular gives snow loading...

BS 729: 1961, was entitled 'Zinc coatings on iron and steel articles" and it was divided into two parts, namely Part 1, "Hot-dip galvanized coatings', and Part 2 'Sherardized coatings'. This edition, which is a revision of BS 729, Part I, applies solely to galvanized coatings and in consequence its title has been changed to 'Hot dip galvanized coatings on iron and steel article...

This British Standard has been prepared under the direction of the Iron and Steel Standards Policy Committee and is identical to the element of BS 4360 : 1990 covering hot finished structural hollow sections in weather resistant steels. This standard, together with BS 7613, BS EN 10113 : Parts 1 to 3, BS EN 10155 and BS EN 10210-1, supersedes BS 4360: 1990, which is withdrawn. ...

This part of BS 8110 has been prepared by Subcommittee B/525/2. It is a revision of BS 8110-1:1985 which is withdrawn. BS 8110-1:1997 incorporates all published amendments made to BS 8110-1:1985.Amendment No. 1 (AMD 5917) published on 31 May 1989;Amendment No. 2 (AMD 6276) published on 22 December 1989;Amendment No. 3 (AMD 7583) published on 15 March 1993;Amendment No. 4 (AMD 7...

This part of BS 8110 has been prepared under the direction of the Civil Engineering and Building Structures Standards Committee. Together with BS 8110-1 it supersedes CP 110-1:1972, which is withdrawn. BS 8110-1 gives recommendations for design and construction. These recommendations relate particularly to routine building construction which makes up the majority of structural ...

This Part of BS 8110 has been prepared under the direction of the Civil Engineering and Building Structures Standards Committee. BS 8110 deals with the structural use of concrete. It is published in three Parts:— Part 1: Code of practice for design and construction;— Part 2: Code of practice for special circumstances;— Part 3: Design charts for singly reinforced beams, doubl...

This Part of BS 952 was prepared by Subcommittee B/52011. It has been used for many years as a valuable source of background and contractual information by architects, specifiers and other glass users. The first edition of this British Standard was published in 1941 and it has since been revised in 1953, 1964 and 1978, principally to take account of product developments. This p...

This first edition of BS952 was published in 1941, revised in 1953, and again in 1964 under the authority of the Glass Industry Standards Committee. The present revision, now under the direction of the Elements and Components (of Diverse Materials) for Buildings Standards Committee, has been published in two separate Parts of which this is Part 2. Part 1 ‘Classification’ was ...